Amprobe – Amprobe Multitest-2000 Continuity-Tester User Manual
Page 92
Advertising
AMPROBE
MULTITEST2000
8.4. "VOLTAGE"
FUNCTION
This function permits you to display in real time the RMS value of AC/DC voltage,
the peak, the Thd value (see paragraph 16.6), the waveform and the harmonic
spectrum of the voltage.
8.4.1. Symbols
The VOLTAGE position has three working modes:
METER
WAVE
HARM
These modes will be described in detail in the next paragraphs.
The symbols used are described below:
Symbol Description
V1
Voltage RMS value
Vpk1
Peak value of the voltage
h01
÷ h49
Harmonic 01
÷ Harmonic 49.
ThdV
Factor of total harmonic distortion of the voltage (see paragraph 16.6).
freq Network
frequency
Tab. 1: Symbols used in the position VOLTAGE
Advertising