Amprobe Multitest-2000 Continuity-Tester - Manual (Page 47)

AMPROBE
MULTITEST2000
LOOP 05.06.01 Phase Sequence not
correct
123
FRQ =60.0HZ V1-2=391V
V2-3= 0V V3-1= 0V
NOT CORRECT
Message “LOW Voltage
Phase T”: means that
Phase T has a low voltage
value. Similar message for
Phase R and S.
In the mode, if the
voltage of one or more
phase is too low, one or
more phases has a low
voltage the instrument
will show a screen
similar to the along side
displayed.
This result can be stored pressing the SAVE key twice (refer to paragraph 9.1).