ProSoft Technology MVI56E-MCMR - Manual (Page 128)

Diagnostics and Troubleshooting MVI56E-MCMR ♦ ControlLogix Platform
User Manual Modbus Communication Module with Reduced Data Block
Page 128 of 225 ProSoft Technology, Inc.
May 13, 2014
1 Click the B ROWSE D EVICE ( S ) button to open the ProSoft Discovery Service.
Select the module, then right-click and choose S ELECT FOR PCB.
2 Close ProSoft Discovery Service, and click the C ONNECT button again.
3 If these troubleshooting steps fail, verify that the Ethernet cable is connected
properly between your computer and the module, either through a hub or
switch (using the grey cable) or directly between your computer and the
module (using the red cable).
If you are still not able to establish a connection, contact ProSoft Technology for
assistance.