ProSoft Technology MVI56E-MCMR - Manual (Page 96)

Configuring the MVI56E-MCMR Module MVI56E-MCMR ♦ ControlLogix Platform
User Manual Modbus Communication Module with Reduced Data Block
Page 96 of 225 ProSoft Technology, Inc.
May 13, 2014
2 In the Download dialog box, click B ROWSE D EVICE ( S ) to open ProSoft
Discovery Service.
3 Select the module, and then click the right mouse button to open a shortcut
menu. On the shortcut menu, choose S ELECT FOR PCB.
4 Close ProSoft Discovery Service.
5 Click D
OWNLOAD to transfer the configuration to the module.
2.7.1 Using CIPconnect
®
to Connect to the Module
You can use CIPconnect
®
to connect a PC to the ProSoft Technology MVI56E-
MCMR mod ule over Ethernet using Rockwell Automation’s 1756-ENBT
EtherNet/IP ® module. This allows you to configure the MVI56E-MCMR network
settings and view module diagnostics from a PC. RSLinx is not required when
you use CIPconnect. All you need are:
 The IP addresses and slot numbers of any 1756-ENBT modules in the path
 The slot number of the MVI56E-MCMR in the destination ControlLogix
chassis (the last ENBTx and chassis in the path).
To use CIPconnect, follow these steps.