ProSoft Technology PTQ-AFC - Manual (Page 28)

Configuring the Processor with Unity Pro PTQ-AFC ♦ Modicon Quantum Platform
User Manual Liquid and Gas Flow Computer for Hydrocarbon Products
Page 28 of 259 ProSoft Technology, Inc.
June 23, 2011
2.5 Downloading the Project to the Quantum Processor
1 Open the PLC menu and then choose C
ONNECT . This action opens a
connection between the Unity Pro software and the processor, using the
address and media type settings you configured in the previous step.
2 On the PLC menu, choose T
RANSFER P ROJECT TO PLC . This action opens
the
T RANSFER P ROJECT TO PLC
dialog box. If you would like the PLC to go to
"Run" mode immediately after the transfer is complete, select (check) the
PLC
R UN AFTER T RANSFER
check box.
3 Click the T
RANSFER
button to download the project to the processor. As the
project is transferred, Unity Pro reports its process in a P
ROGRESS
dialog box,
with details appearing in a pane at the bottom of the window.
When the transfer is complete, place the processor in Run mode. The processor
will start scanning your process logic application.