ProSoft Technology PTQ-AFC - Manual (Page 46)

Configuring the Processor with Concept PTQ-AFC ♦ Modicon Quantum Platform
User Manual Liquid and Gas Flow Computer for Hydrocarbon Products
Page 46 of 259 ProSoft Technology, Inc.
June 23, 2011
13 In the PLC Configuration window, open the T
EMPLATES
menu, and then
choose S
AVE T EMPLATE AS
. Name the template ptqclock, and then click OK
to save the template.
14 In the PLC Configuration window, open the O
NLINE
menu, and then choose
D ISCONNECT . At the disconnect message, click Y
ES
to confirm your choice.
At this point, you have successfully

Created and downloaded a Quantum project to the PLC
 Preset values in data registers that will later be monitored in the ProTalk
module.
You are now ready to complete the installation and setup of the ProTalk module.