ProSoft Technology PTQ-AFC - Manual (Page 29)

PTQ-AFC ♦ Modicon Quantum Platform Configuring the Processor with Concept
Liquid and Gas Flow Computer for Hydrocarbon Products User Manual
ProSoft Technology, Inc. Page 29 of 259
June 23, 2011
3 Configuring the Processor with Concept
In This Chapter
 Information for Concept Version 2.6 Users ............................................ 30
 Creating a New Project.......................................................................... 32
 Adding the PTQ Module to the Project .................................................. 35
 Setting up Data Memory in Project ........................................................ 38
 Downloading the Project to the Processor............................................. 41
 Verifying Successful Download ............................................................. 43
The following steps are designed to ensure that the processor is able to transfer
data successfully with the PTQ module. As part of this procedure, you will use
Concept configuration software from Schneider Electric to create a project, add
the PTQ module to the project, set up data memory for the project, and then
download the project to the processor.
Important Note: Concept software does not report whether the PTQ module is present in the rack,
and therefore is not able to report the health status of the module when the module is online with
the Quantum processor. Please consider this when monitoring the status of the PTQ module.