ProSoft Technology PLX81-EIP-61850 - Manual (Page 65)

PLX8x-EIP-61850 ♦ Communication Gateway Diagnostics and Troubleshooting
Server to
IEC 61850 Client User Manual
ProSoft Technology, Inc. Page 65 of 167
July 2, 2015
Remote Node Status
Command Description
Remote Node Status 0 Indicates if the remote node for this index is configured or not. If the
remote node is configured the unique index is included to indicate the
reference start of the following for the status information
Remote Node IP
Address The IP Address used by the remote node for this index
Remote Node Name The remote node name used by the remote node for this index
Remote Node Vendor The Vendor that manufactures the remote node for this index
Remote Node Model The Model Number used by the remote node for this index
Remote Node Revision The revision used by the remote node for this index
Remote IED Command
Status
Lists the commands by individual unique index as corresponding to the
current operating configuration in the gateway, in which the following data
are returned to indicate the command status
Report Status
Command Name Description
Command Status
Entry(s)
LIST… Command Status List []… for each
command entry…
Lists the commands by
individual unique index as
corresponding to the current
operating configuration in the
ProSoft module, in which the
following data are returned to
indicate the command status
Current Command
Status <currentstatus value = "" description = "" /> Indicates the last available
status of the command sent
to the remote node and the
result, being either "OK" or
"ERR"
Command Total Error
Count <cmderrcount value = "" description = "" /> Indicates the total error count
for this unique command as
it was processed by the IEC-
61850 drive
Report Status Entry(s)
LIST…
Report Status List []… for each report
entry… Lists the reports by individual
unique index as
corresponding to the current
operating configuration, in
which the following data are
returned to indicate the
report received count
Report Status Entry <rptindex value = "" description = "" /> Lists the report control block
status by individual unique
index as corresponding to
the current operating
configuration
Reports Received
Count <rptcount value = "" description = "" /> Indicates the total report
received count for this
unique report as it was
processed by the PLX8x
IEC-61850 driver