ProSoft Technology PLX81-EIP-61850 - Manual (Page 91)

PLX8x-EIP-61850 ♦ Communication Gateway Reference
Server to
IEC 61850 Client User Manual
ProSoft Technology, Inc. Page 91 of 167
July 2, 2015
Report Control Block Services
There are three typical RCB services:
 Report
 GetBRCBValues
 SetBRCBValues
The process starts with the Client issuing a RptEna (report enable), as follows:
{This diagram has been taken directly from the IEC 61850 Standard document.}
The Report service is used by the BRCB to send reports from the server to the
Client. Transmission is unconfirmed, meaning there is no validation check at the
Client or acknowledement from the Client back to the server.