ProSoft Technology PLX81-EIP-61850 - Manual (Page 67)

PLX8x-EIP-61850 ♦ Communication Gateway Diagnostics and Troubleshooting
Server to
IEC 61850 Client User Manual
ProSoft Technology, Inc. Page 67 of 167
July 2, 2015
Ethernet Statistics
Function Description
RX Bytes Total received byte count
RX Packets Total number of received Ethernet packets
TX Bytes Total number of transmitted bytes
TX Packets Total number of transmitted Ethernet packets
Jumper States
Jumper Name States Description
Setup ON or OFF
NOTE: While this jumper is
removed 'OFF', all webpages are
disabled on the module. It is
required that the setup jumper be
removed for normal operation, as
webpage activity may interfere with
the EtherNet/IP or IEC 61850
communications
Default IP ON or OFF
Reserved ON or OFF
LED States
State Description
Error ON or OFF. This is the "ERR" LED above the power connector
Config ON or OFF. This is the "CFG" LED above the power connector
Fault ON or OFF. This is the "FLT" LED above the power connector
ms OFF. This is not used by PLX8x-EIP-61850
ns OFF. This is not used by PLX8x-EIP-61850
Network Configuration
Function Description
IP Address
This is the gateway’s configured IP address you entered in ProSoft 61850
Configuration Manager.
Network Mask
This is the gateway’s configured network mask you entered.
Gateway This is the gateway ’s configured gateway you entered.