ProSoft Technology PLX81-EIP-61850 - Manual (Page 73)

PLX8x-EIP-61850 ♦ Communication Gateway Diagnostics and Troubleshooting
Server to
IEC 61850 Client User Manual
ProSoft Technology, Inc. Page 73 of 167
July 2, 2015
Resources
ProSoft Technology Click to be directed to ProSoft Technology’s Web site.
ODVA Organization Click to be directed to the ODVA website.
The following information is shown on the Home Page of the gateway Web page:
Device Name The Project Name you set in the ProSoft EIP-61850 Configuration
Manager.
Ethernet Address (MAC) The gateway’s MAC address.
IP Address The gateway’s IP Address.
Product Revision The product revision number, determined by the version number of
the firmware currently in the gateway.
Serial Number The gateway’s serial number.
Uptime The number of hours, minutes, and seconds that the gateway has
been "up" or “alive” since the last reboot or reconnection of power.
Current Time The gateway’s current time. You can change the gateway’s time by
using SNTP (refer to Configuring the Gateway EtherNet/IP Adapter
on page 19), or by choosing Functions / Set Date & Time on the
gateway’s webpage.
Error LED ON or OFF. This is the "ERR" LED above the power connector.
Config LED ON or OFF. This is the "CFG" LED above the power connector.
Fault LED OK or ON. This is the "FLT" LED above the power connector.
4.8 Event Logger
The gateway’s internal processes and drivers write event log data to the Event
Logger. You can access the Event Logger from ProSoft ProSoft 61850
Configuration Manager by right-clicking the ProSoft Gateway bubble, and
choosing E
VENT L OGGER .