Panasonic AG-CX350 4K Camcorder - Manual (Page 149)

– 149 –
Chapter 6 Playback — Thumbnail operation
Display of clip information
Displays the information of the clip where the cursor is positioned.
1
Move the yellow cursor to the clip to display the clip information.
2
Select the [THUMBNAIL] menu → [CLIP] → [INFORMATION].
The clip information is displayed.
r Clip information
1 2 3
6
4 5
7
8
9
10
11
12
13
14
1 Clip that cannot be played back
This is displayed when the clip cannot be played back with the camera because the system frequency is different, etc.
2 Thumbnail number
3 Protect status of the clip/defective clip/unknown clip/incomplete clip
: This is displayed when the clip is protected.
: This is displayed for a defective P2 clip that may be repaired.
: This is displayed for a defective P2 clip that cannot be repaired.
: This is displayed for a P2 clip with a different format for P2 standard.
: This is displayed for a P2 clip when the clip is recorded over multiple memory cards, and any of those memory cards are not inserted.
4 Thumbnail image
5 Clip name
6 [START TC]
Displays the time code value at the start of the recording.
7 [START UB]
Displays the user bits value at the start of the recording.
8 [DATE]
Displays the date of the recording.
9 [TIME]
Displays the time at the start of recording.
10 [DURATION]
Displays the time length of the clip.
11 [PIXEL/FREQ]
Displays the recording format of the clip.
12 [CODEC]
Displays the recording file format and the recording codec of the clip.
13 [FRAME RATE]
Displays the recording frame rate of the clip.
Displays when the variable frame rate recording function is enabled and the clip is recorded in a frame rate different from the system frequency.
14 [GAMMA]
Displays the gamma of the clip.
Displays when the [SYSTEM] menu
→ [FILE FORMAT] → [P2]/[MOV] is set and recording is performed..