Panasonic AG-CX350 4K Camcorder - Manual (Page 66)

– 66 –
Chapter 4 Operation — Menu settings
(Factory setting: [0dB])
[MID GAIN]
Sets the gain value to be assigned to the <M> position of the <GAIN> switch.
The items that can be set are as follows.
f [ − 3dB]…[18dB]
(Factory setting: [6dB])
[HIGH GAIN]
Sets the gain value to be assigned to the <H> position of the <GAIN> switch.
The items that can be set are as follows.
f [ − 3dB]…[18dB]
(Factory setting: [12dB])
[SUPER GAIN]
Sets the super gain to be assigned to the USER button.
Toggles [24dB], [30dB], [36dB], and the normal gain in order each time the USER button is pressed or the USER button icon is touched when set to
[ALL].
The items that can be set are as follows.
f [24dB], [30dB], [36dB], [ALL]
(Factory setting: [36dB])
[O.I.S.]
Enables/disables the optical image stabilizer function.
If [O.I.S.] is assigned to the USER button, pressing the USER button switches [ON]/[OFF].
For details about optical image stabilizer, refer to “Optical image stabilizer function” (page 140).
[ON] Enables the optical image stabilizer function.
[OFF] Disables the optical image stabilizer function.
(Factory setting: [ON])
[HYBRID O.I.S.]
Enables/disables the hybrid optical image stabilizer function.
For details about optical image stabilizer, refer to “Optical image stabilizer function” (page 140).
[ON] Enables the hybrid optical image stabilizer function.
[OFF] Disables the hybrid optical image stabilizer function.
(Factory setting: [ON])
[O.I.S. MODE]
Switches the operation mode of the optical image stabilizer function.
[NORMAL] Specifies the standard setting for a good balance of correction for large and small camera shake.
[PAN/TILT] Specifies a setting appropriate for shooting that uses a lot of panning and tilting of the camera.
[STABLE] Specifies a setting appropriate for fixing a composition to shoot a subject.
(Factory setting: [NORMAL])
[ATW]
Assigns the auto tracking white balance function to the <WHITE BAL> switch.
The items that can be set are as follows.
f [Ach], [Bch], [PRE], [OFF]
(Factory setting: [OFF])
[ATW SPEED]
Sets the control speed of the auto tracking white balance function.
The items that can be set are as follows.
f [FAST], [NORMAL], [SLOW]
(Factory setting: [NORMAL])
[ATW TARGET R]
Finely adjusts the Rch output for convergence with the auto tracking white balance operation.
The items that can be set are as follows.
f [ − 10]…[10]
(Factory setting: [0])
[ATW TARGET B]
Finely adjusts the Bch output for convergence with the auto tracking white balance operation.
The items that can be set are as follows.
f [ − 10]…[10]
(Factory setting: [0])