Panasonic AG-CX350 4K Camcorder - Manual (Page 26)

– 26 –
Chapter 2 Description of Parts — Camera
14 <AUDIO INPUT 1> terminal (XLR, 3-pin)
Connects an audio equipment or an external microphone.
15 Rear tally lamp
Illuminates when the recording is started. Flashes when the battery level becomes low.
Whether or not to illuminate the lamp can be set in the menu.
16 <HDMI> terminal
A terminal to output video signal by connecting a monitor, etc.
17 Battery mounting section
Mounts a battery.
18 Battery release button
Used when removing the battery from the camera.
19 <DC IN 12V> terminal
Connects the supplied AC adaptor and supplies an external power.
20 <AUDIO INPUT 2> terminal (XLR, 3-pin)
Connects an audio equipment or an external microphone.
Top side
1
13
12
14
2 3 4 5
19
6 7
11 10 9 8 7
21 22 23
16
17
18
20
15
1 LCD monitor
2 Light shoe
Attaches the video light, etc.
3 REC button (on the handle)
Starts or stops the recording.
This includes hold mechanism.
4 Zoom lever (on the grip)
Adjusts the zoom of an image.
<T>: Zooms in the image.
<W>: Zooms out the image.
5 <IRIS>/<USER 6> button
Selects the method for adjustment of the lens iris.
This is also used as the USER button (USER6).
6 <REC CHECK> button
Press this button while recording is suspended to play back the last three seconds of video or audio of the clip that was just shot.
7 Shoulder strap mounting section
Mounts the supplied shoulder strap. (page 34)
8 Zoom lever (on the handle)
Adjust the zoom of an image.
<T>: Zooms in the image.
<W>: Zooms out the image.
9 Focal plane index < >
Indicates the focal plane of the MOS sensor. It provides a reference for measuring the accurate focal distance from the subject.
10 Handle mounting holes
Mounts the handle.
f Mounting hole size
- 1/4-20 UNC (screw length 5.5 mm or shorter)
11 Accessory shoe
Attaches the video light.