Connection with a computer in card reader mode, Host> terminal – Panasonic AG-CX350 4K Camcorder User Manual

Page 172

Advertising
background image

– 172 –

Chapter 8 Connecting to External Devices — Connection function via the <USB3.0 DEVICE>/<USB2.0 HOST> terminal

Connection function via the <USB3.0 DEVICE>/<USB2.0 HOST> terminal

Connection with a computer in card reader mode

Connect the camera to a computer via the USB type C cable to use the camera as a card reader for the memory card.

Connecting to a computer

USB type C cable (optional)

Computer

Type C

1

Connect the USB cable to the <USB3.0 DEVICE> terminal.

2

Select the [OTHERS] menu

[USB DEVICE]

[CARD READER MODE].

3

Select [YES] when the confirmation message is displayed.

During USB connection, [USB connected. Please operate via PC.] is displayed in the center of the viewfinder or LCD monitor.
If the USB connection is being moved or it is not connected properly, [Connect this unit to PC using USB cable.] is displayed.

4

Exit the card reader mode.

There are following methods.

f

Turn the power switch of the camera to <

h

> (standby).

f

Press the <EXIT> button.

After exiting the card reader mode, returns to camera shooting status in approximately five seconds.

@

@

NOTE

t

A USB type C cable is not supplied with this camera. Prepare a commercial USB type C cable (double-shielded for noise suppression).

t

Using a USB cable within 1.5 m as much as possible is recommended.

t

When connecting the camera to a computer via USB, ensure that no other device is connected to the computer via USB.

t

Do not remove the memory card when connecting the camera via USB.

t

The card access lamp while connected to USB will turn off unless accessing.

t

When the camera is operating in the card reader mode, camera shooting, recording/playback operation, or thumbnail operation of the clip is not
allowed.

t

When the camera is operating in the card reader mode, the remaining recording capacity and status of the memory card are not displayed. Also,
video/audio cannot be output or displayed.

t

The LCD monitor lights up by touching the monitor if it has turned out to save energy.

Advertising