Panasonic AG-CX350 4K Camcorder - Manual (Page 56)

– 56 –
Chapter 3 Preparation — Tally lamp
Tally lamp
The front tally lamp and the rear tally lamp can be illuminated during the shooting.
1
Select the [OTHERS] menu → [LED] → [TALLY LED] → [FRONT]/[REAR]/[BOTH].
f The tally lamp will flash when the camera is in the following status.
‑ When the remaining recording capacity of the memory card or the remaining battery level is low (one time per second)
‑ When the memory card has no more space to record (four times per second)
‑ When a warning such as a system error or a recording abnormality has occurred (four times per second)
@ @
NOTE
t The tally lamp will not illuminate or flash when the [OTHERS] menu → [LED] → [TALLY LED] → [OFF] is set.