Panasonic AG-CX350 4K Camcorder - Manual (Page 85)

– 85 –
Chapter 4 Operation — Menu settings
(Factory setting: [HIGH])
[LCD/VF HDR]
Sets the output image from the LCD monitor and viewfinder.
[SDR] Outputs in the standard dynamic range.
[HDR] Outputs in the high dynamic range.
(Factory setting: [HDR])
@ @ NOTE
t The setting is fixed to [SDR] when set to following menu.
‑ [SYSTEM] menu → [REC FORMAT] → [480-59.94i/AVCHD SA]
‑ [SYSTEM] menu → [REC FORMAT] → [576-50.00i/AVCHD SA]
t When the [SCENE FILE] menu → [GAMMA MODE SEL] is set to anything other than [HLG], the camera image is output in the standard dynamic
range.
[INDICATOR]
Selects the indicator to display in the output image.
[FULL AUTO]
Displays/hides the status when the <AUTO/MANUAL> switch is at <AUTO>.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[SLOT1/2 STATUS]
Displays/hides the status of the card slot and remaining recording capacity.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[2 SLOTS FUNC.]
Displays/hides the setting in the [RECORDING] menu → [2 SLOTS FUNC.].
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[STREAMING]
Displays/hides the streaming status.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[NETWORK]
Displays/hides the wireless LAN and wired LAN connection status.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[BATTERY REMAIN]
Displays/hides the power status.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[REC FORMAT]
Displays/hides the recording format settings.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[FRAME RATE]
Displays/hides the settings in the [SCENE FILE] menu → [FRAME RATE].
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[CLIP NAME]
Displays/hides the clip file name to be recorded. Up to eight characters from the beginning of the file name are displayed.