Panasonic AG-CX350 4K Camcorder - Manual (Page 21)

– 21 –
Chapter 2 Description of Parts — Camera
Camera
Left side
1 2 3 6 7
9
9
4 5
8
1 Eye cup
2 Eyepiece
Do not leave the eyepiece pointed toward the sun. Doing so might damage the devices inside.
3 <USB2.0 HOST> terminal
Can connect to wireless LAN when the wireless module (optional) compatible to camera is mounted.
4 REC button (on the grip)
Starts or stops the recording.
Used for direct shooting in thumbnail mode.
5 Power switch
Switches between power on/standby.
To turn on, set the power switch to <
j > (ON). To set to standby, set the power switch to < h > (standby).
6 Microphone cable clamp
Fixes the external microphone cable.
7 Microphone holder mounting section
Mounts the supplied microphone holder with microphone holder screws.
8 Tripod holes
Attaches the tripod. (bottom)
f Mounting hole size
- 1/4-20 UNC (screw length 5.5 mm or shorter)
- 3/8-16 UNC (screw length 5.5 mm or shorter)
9 Accessory mounting holes
Attaches accessories.
The weight of the accessory should be no more than 2 k
] including the mounting fixture.
f Mounting hole size
- Mounting screw size: M3
- Mounting hole depth: 6 mm
- Mounting hole pitch: 25 mm