Panasonic AG-CX350 4K Camcorder - Manual (Page 97)

– 97 –
Chapter 4 Operation — Menu settings
[ENCRYPTION]
Sets the encryption method when the [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [INFRA(SELECT)]/[INFRA(MANUAL)] is selected.
The items that can be set are as follows.
f [WPA-TKIP], [WPA-AES], [WPA2-TKIP], [WPA2-AES], [NONE]
(Factory setting: [WPA2-AES])
@ @ NOTE
t The setting is fixed to [WPA2-AES] when the [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [DIRECT] is set.
[ENCRYPT KEY]
Sets the encryption key. Set the key using a string of 8 to 63 characters or a hexadecimal number with 64 digits.
(Factory setting: [01234567890123456789abcdef])
[IPv4 SETTING]
[DHCP] Sets whether to use the automatic acquisition through DHCP or to use the DHCP server function of the camera.
[OFF]: Does not use DHCP.
[CLIENT]: Performs automatic acquisition through DHCP if connecting by setting [WLAN PROPERTY] → [TYPE] →
[INFRA(SELECT)]/[INFRA(MANUAL)].
[SERVER]: Enables the DHCP server function of the camera when connecting by setting [WLAN PROPERTY] → [TYPE] →
[DIRECT].
f Factory setting: [OFF]
[IP ADDRESS] Sets the IP address.
f Factory setting: [192.168.0.1]
@ @
NOTE
t Cannot be set when [WLAN PROPERTY] → [IPv4 SETTING] → [DHCP] → [CLIENT] is selected.
[SUBNET MASK] Sets the subnet mask.
f Factory setting: [255.255.255.0]
@ @
NOTE
t Cannot be set when [WLAN PROPERTY] → [IPv4 SETTING] → [DHCP] → [CLIENT] is selected.
[DEFAULT GATEWAY] Sets the default gateway.
f Factory setting: [192.168.0.254]
@ @ NOTE
t If you do not use default gateway, set to [0.0.0.0].
t Cannot be set when [WLAN PROPERTY] → [IPv4 SETTING] → [DHCP] → [CLIENT] is selected.
t Disables the setting for the default gateway when [WLAN PROPERTY] → [TYPE] → [DIRECT] is selected.
[PRIMARY DNS] Sets the primary DNS server.
f Factory setting: [0.0.0.0]
@ @ NOTE
t Disables the setting for the primary DNS server when [WLAN PROPERTY] → [TYPE] → [DIRECT] is selected.
[SECONDARY DNS] Sets the secondary DNS server.
f Factory setting: [0.0.0.0]
@ @ NOTE
t Disables the setting for the secondary DNS server when [WLAN PROPERTY] → [TYPE] → [DIRECT] is selected.
[INFORMATION]
[STATUS]
Displays the status of the network function.
[UTILITY]
Performs the various operations related to the network function.
[NETWORK INITIALIZE]
Restores the network setting status to the factory settings.
[EASY IP SETTING]
Sets the time to accept EASY IP Setup Software.
The items that can be set are as follows.
f [DISABLE], [20 MIN.], [UNLIMITED]
(Factory setting: [DISABLE])
@ @ NOTE
t This is fixed to [UNLIMITED] when [NDI | HX] is selected in [NETWORK FUNC].
[EASY IP CAMERA TITLE]
Configure the individual device names to display in EASY IP Setup Software. (15 characters or less)