Panasonic AG-CX350 4K Camcorder User Manual
Page 195
– 195 –
Chapter 10 Notes — Warning system
Alert
Screen display
Description
Behavior and cause
Camera image screen
[SIMUL REC WARNING <SLOT 1>]/
[SIMUL REC WARNING <SLOT 2>]
An error has occurred in one of the memory cards during
simultaneous recording.
A message is displayed for approximately five seconds.
f
Recording to the other memory card will continue.
[SIMUL REC WARNING <SLOT 1>]/
[SIMUL REC WARNING <SLOT 2>]
Recording has been attempted while the number of clips
has exceeded the limit on one of the memory cards during
simultaneous recording.
A message is displayed for approximately five seconds.
f
Recording to the other memory card will continue.
f
[SIMUL REC WARNING <SLOT 1>] [<OVER MAX
NUM. OF CLIPS>]/[SIMUL REC WARNING <SLOT 2>]
[<OVER MAX NUM. OF CLIPS>] is displayed in the
warning display field of the STATUS screen for the mode
check.
f
Replace the memory card or delete unnecessary clips.
[BACKGROUND REC WARNING
<SLOT 1>]/[BACKGROUND REC
WARNING <SLOT 2>]
An error has occurred in one of the memory cards during
background recording.
A message is displayed for approximately five seconds.
f
Recording to the other memory card will continue.
[BACKGROUND REC WARNING
<SLOT 1>]/[BACKGROUND REC
WARNING <SLOT 2>]
Recording has been attempted while the number of clips
has exceeded the limit on one of the memory cards during
background recording.
A message is displayed for approximately five seconds.
f
Recording to the other memory card will continue.
f
[BACKGROUND REC WARNING <SLOT 1>] [<OVER
MAX NUM. OF CLIPS>]/[BACKGROUND REC
WARNING <SLOT 2>] [<OVER MAX NUM. OF CLIPS>]
is displayed in the warning display field of the STATUS
screen for the mode check.
f
Replace the memory card or delete unnecessary clips.
[FAN STOPPED]
The fan has stopped.
A message is displayed.
f
The current operation will continue.
f
Stop the use immediately when the fan has stopped, and
consult the dealer.
f
If the fan has stopped, temperature of the camera will
rise. Therefore, do not use the camera for a long period
of time.
[REINSERT OR CHECK CARD
<SLOT 1>]/[REINSERT OR CHECK
CARD <SLOT 2>]
The memory card cannot be recognized properly because
a recording medium which is not supported has been
inserted or there is dirt on the terminal of the memory card.
A message is displayed for approximately five seconds.
f
Check the memory card that is inserted.
f
Insert the memory card again if displayed when inserting
a memory card.
[FORMAT ERROR CARD <SLOT 1>]/
[FORMAT ERROR CARD <SLOT 2>]
A memory card with management information out of
specifications has been inserted.
(Include when the system frequency (59.94 Hz system or
50.00 Hz system) for the AVCHD format of the memory
card is different from the setting in the [SYSTEM] menu
→
[FREQUENCY])
A message is displayed for approximately five seconds.
f
Insert a memory card that can record.
f
The system frequency information for the AVCHD format
is confirmed at the time of formatting or at the first
recording.
[NOT SDXC CARD <SLOT 1>]/[NOT
SDXC CARD <SLOT 2>]
A SDHC memory card that cannot record the MOV format
data or a 32 GB microP2 card is inserted when [FILE
FORMAT] is set to MOV format.
A message is displayed for approximately five seconds.
f
Insert a SDXC memory card or 64 GB microP2 card.
[INCOMPATIBLE CARD <SLOT 1>]/
[INCOMPATIBLE CARD <SLOT 2>]
A memory card that may not be able to record due to slow
writing speed has been inserted.
A message is displayed for approximately five seconds.
f
The current operation will continue.
f
Use a memory card with sufficient writing speed.
[DIR NG CARD <SLOT 1>]/[DIR NG
CARD <SLOT 2>]
A microP2 card with inappropriate directory placement is
inserted when [FILE FORMAT] is set to P2 format
A message is displayed for approximately five seconds.
f
The current operation will continue.
f
Take a backup of the card immediately, and use again
after formatting.
[RUN DOWN CARD <SLOT 1>]/[RUN
DOWN CARD <SLOT 2>]
A microP2 card exceeding the specified number of
overwrites is inserted.
A message is displayed for approximately five seconds.
f
The current operation will continue.
f
Replacement of the microP2 card is recommended.
[SD CARD <SLOT 1>]/[SD CARD
<SLOT 2>]
SDHC/SDXC memory card is inserted when [FILE
FORMAT] is set to P2 format.
A message is displayed for approximately five seconds.
f
The current operation will continue.
f
Recording to a microP2 card is recommended.
[BACKUP BATT EMPTY]
Voltage lowering of the backup battery for internal clock
was detected when the power is set to <
j
> (ON).
A message is displayed for approximately five seconds.
f
The current operation will continue.
f
Set the date/time again after charging the built-in battery.