Panasonic AG-CX350 4K Camcorder User Manual
Page 167
– 167 –
Chapter 7 Output and Screen Display — Screen status display
Item
Description
[HDR/SDR]
[SDI OUT]/[AV OUT]
Displays as follows depending on the setting for the output destination of video
and audio.
f
When set to [SDI + HDMI]:
The output image from the <SDI OUT> terminal is displayed with [HDR]/
[SDR].
f
When set to [AV + HDMI]:
The output image from the <AV OUT> terminal is displayed with [SDR].
[HDMI OUT]
The output image from the <HDMI> terminal is displayed with [HDR]/[SDR].
[LCD/VF]
Displays the output image from the LCD monitor and the viewfinder with [HDR]/
[SDR].
[CARD STATUS]
—
Displays the status, remaining recording capacity, and the total capacity of the
memory card inserted in the card slot.
It is not displayed when set to the [NETWORK] menu
→
[NETWORK FUNC]
→
[NDI
|
HX].
The status of the memory card that is displayed are following types.
f
[NO CARD]: Memory card is not inserted.
f
[UNSUPPORTED]: Memory card is not supported.
f
[FORMAT ERROR]: Memory card cannot be used. (Format error)
f
[PROTECTED]: It is write protected. (The write-protection switch of the
memory card is set to the LOCK side)
f
[NO REMAIN]: There is no remaining recording capacity.
f
[NOT SDXC]: SDXC memory card is not inserted in the MOV recording.
f
Cases other than above: The remaining recording capacity is displayed in 0%
through 100%.
[TOTAL]
Displays the remaining recording capacity/total capacity of the memory cards in
the card slot 1 and the card slot 2.
[SLOT1]
Displays the status and remaining recording capacity/total capacity of the
memory card in card slot 1.
[SLOT2]
Displays the status and remaining recording capacity/total capacity of the
memory card in card slot 2.
AUDIO screen
Displays the audio input/output settings and the audio level meter.
When P2 or MOV is set as the recording format, the audio channel displayed in the audio level meter follows the setting in the [AUDIO] menu
→
[OUTPUT SETTINGS]
→
[AUDIO OUT].
f
Displays the audio channel 1 and audio channel 2 when set to [CH1]/[CH2]/[CH1/2 STEREO]/[CH1/2 MIX].
f
Displays the audio channel 3 and audio channel 4 when set to [CH3]/[CH4]/[CH3/4 STEREO]/[CH3/4 MIX].
f
Switches the audio channel to display in the audio level meter (audio channel 1/2 and audio channel 3/4) while the USER button to which [AUDIO
MON SEL] is assigned is pressed or the USER button icon is touched.
Item
Description
[AUDIO]
[AUDIO OUT]
Displays the audio channel and the format output from the <AV OUT> terminal,
headphone terminal, and the built-in speaker with [CH1]/[CH2]/[CH1/2
STEREO]/[CH1/2 MIX]/[CH3]/[CH4]/[CH3/4 STEREO]/[CH3/4 MIX].
[SELECT]
[CH1] - [CH4]
The audio to be recorded in each channel is displayed with [INT(L)]/[INT(R)]/
[INPUT1]/[INPUT2].
[LINE/MIC]
[CH1] - [CH4]
The audio input signal of each channel is displayed with [LINE]/[MIC]/
[MIC+48V].
Displays [---] when [INT(L)] or [INT(R)] is selected as the audio to be recorded.
[LEVEL]
[CH1] - [CH4]
Displays the adjustment method of the recording level of the audio for each
channel with [AUTO]/[MANU].
[LIMITER]
[CH1] - [CH4]
Displays enable/disable of limiter for each channel with [ON]/[OFF].
Displays [---] when the adjustment method of the recording level of the audio is
set to [AUTO].
[LOWCUT]
[CH1] - [CH4]
Displays enable/disable of low-cut filter for each channel with [ON]/[OFF].
SWITCH screen
Displays the function assigned to the USER switch, <GAIN> switch, and <WHITE BAL> switch as well as the setting value.
Item
Description
[USER SW]
[1] - [7]
Displays the function assigned to <USER 1> through <USER 7> buttons.
[OTHER ASSIGN]
[GAIN L]
Displays the gain value assigned to the <L> position of the <GAIN> switch.
[GAIN M]
Displays the gain value assigned to the <M> position of the <GAIN> switch.
[GAIN H]
Displays the gain value assigned to the <H> position of the <GAIN> switch.
[S.GAIN]
Displays the list of gain values assigned as a super gain.
[WHITE BAL A]
Displays the color temperature assigned to the <A> position of the <WHITE
BAL> switch.
Displays [ATW] when the auto tracking white balance function is assigned.