Panasonic AG-CX350 4K Camcorder - Manual (Page 99)

– 99 –
Chapter 4 Operation — Menu settings
[SUPER SLOW]
Sets the super slow recording. Enable this setting to shoot slow motion video.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
@ @ NOTE
t This setting is fixed to [OFF] when anything other than the [SYSTEM] menu → [FILE FORMAT] → [MOV] is set.
t This setting is fixed to [OFF] when the [SYSTEM] menu → [REC FORMAT] is set to anything other than 1920 × 1080.
t This setting is fixed to [OFF] when the [SYSTEM] menu → [REC FORMAT] is set to 59.94i/50.00i.
[SHOOTING MODE]
Sets the shooting mode according to the shooting environment.
[NORMAL] Selects the shooting mode for an environment at normal brightness.
[HIGH SENS.] Selects high-sensitivity. (Appropriate when shooting in a dark environment.) [H.SENS.] is displayed in the camera image
screen.
(Factory setting: [NORMAL])
[OTHERS] menu
Configures the settings for writing/loading/initializing user files to the internal memory and other settings of the camera.
[FILE]
Saves and loads the setting data.
For the saving and loading target, refer to “Target items for scene file/setup file/initialization” (page 105).
For details about saving and loading, refer to “Handling setting data” (page 112).
[SCENE FILE(SD CARD)]
Loads or saves scene files on a memory card.
[LOAD] Selects and loads the scene file saved on the memory card into the camera.
Can select if all of the scene files ([F1:] to [F6:]) are loaded, or individually loaded.
[SAVE] The setting values of the current scene file ([F1:] to [F6:]) are overwritten to the file selected from the list of scene files saved
in the memory card.
[SAVE AS] The setting values of the current scene file ([F1:] to [F6:]) is saved to the memory card as a new scene file by entering the file
name.
[SETUP FILE(SD CARD)]
Loads or saves setup files on a memory card.
[LOAD] Selects the setup file saved on the memory card to load on the camera.
[SAVE] Overwrites the file selected in the list of the setup files saved on the memory card with the current setting values of the
camera.
[SAVE AS] Enter a file name to save the current setting values in the camera as a new setup file in the memory card.
[SETUP FILE(MEMORY)]
Loads/saves/initializes setup files in the internal memory of the camera.
[LOAD] Loads setup data saved on the memory.
[SAVE] Saves the setup data to the memory.
[INITIALIZE] Restores the factory settings from the current settings for the menus in the setup data.
[SLOT FOR LOAD/SAVE]
Sets the card slot to load and save the scene file, setup file, and streaming setting file.
The items that can be set are as follows.
f [SLOT1], [SLOT2]
(Factory setting: [SLOT1])
[COLOR BARS]
[COLOR BARS TYPE]
Sets the color bar to be used.
[SMPTE] Uses the color bars in SMPTE standard.
[FULL] Uses the full color bars.
(Factory setting: [SMPTE])