Panasonic AG-CX350 4K Camcorder User Manual
Page 95
– 95 –
Chapter 4 Operation — Menu settings
The items that can be set are as follows.
f
When [FILE FORMAT] is set to [P2] or [MOV], and [REC FORMAT] is set to 1080/50p
-
[1920
×
1080-50fps 24M], [1920
×
1080-50fps 16M], [1920
×
1080-50fps 10M], [1920
×
1080-50fps 8M], [1280
×
720-50fps 14M], [1280
×
720-50fps 10M],
[1280
×
720-50fps 6M]
(Factory setting: [1920
×
1080-50fps 10M])
f
When [FILE FORMAT] is set to [P2] or [MOV], and [REC FORMAT] is set to 1080/59.94p
-
[1920
×
1080-60fps 24M], [1920
×
1080-60fps 16M], [1920
×
1080-60fps 10M], [1920
×
1080-60fps 8M], [1280
×
720-60fps 14M], [1280
×
720-60fps 10M],
[1280
×
720-60fps 6M]
(Factory setting: [1920
×
1080-60fps 10M])
f
When [FILE FORMAT] is set to [P2] or [MOV], and [REC FORMAT] is set to 1080/50i or 1080/25p
-
[1920
×
1080-25fps 14M], [1920
×
1080-25fps 10M], [1920
×
1080-25fps 6M], [1280
×
720-25fps 8M], [1280
×
720-25fps 4M], [1280
×
720-25fps 2M]
(Factory setting: [1920
×
1080-25fps 10M])
f
When [FILE FORMAT] is set to [P2] or [MOV], and [REC FORMAT] is set to 1080/59.94i or 1080/29.97p
-
[1920
×
1080-30fps 14M], [1920
×
1080-30fps 10M], [1920
×
1080-30fps 6M], [1280
×
720-30fps 8M], [1280
×
720-30fps 4M], [1280
×
720-30fps 2M]
(Factory setting: [1920
×
1080-30fps 10M])
f
When [FILE FORMAT] is set to [P2], and [REC FORMAT] is set to 720/50p
-
[1280
×
720-50fps 14M], [1280
×
720-50fps 10M], [1280
×
720-50fps 6M]
(Factory setting: [1280
×
720-50fps 10M])
f
When [FILE FORMAT] is set to [P2], and [REC FORMAT] is set to 720/59.94p
-
[1280
×
720-60fps 14M], [1280
×
720-60fps 10M], [1280
×
720-60fps 6M]
(Factory setting: [1280
×
720-60fps 10M])
@
@
NOTE
t
Cannot be set when [FILE FORMAT] is set to [AVCHD] or [REC FORMAT] is set to UHD or 1080/23.98p.
[MULTICAST]
Enables/disables the multicast function.
(Factory setting: [DISABLE])
[MULTICAST ADDRESS]
Sets the address when using the streaming with the multicast.
(Factory setting: [239.192.0.20])
[MULTICAST PORT]
Sets the port number when using the streaming with the multicast.
(Factory setting: [37004])
[CLEAR ACTIVATION]
Clears the activation license information that is saved.
The items that can be selected are as follows.
f
[YES], [NO]
[LAN PROPERTY]
Performs settings related to the wired LAN.
[MAC ADDRESS]
Displays the MAC address for the wired LAN of the camera. (Cannot be changed)
[IPv4 SETTING]
[DHCP]
Sets whether to use the automatic acquisition through DHCP or to use the DHCP server function of the camera.
[OFF]: Does not use DHCP.
[CLIENT]: Performs automatic acquisition through DHCP.
The address from 192.168.0.10 through 192.168.0.255 is automatically assigned when the IP address cannot be acquired
automatically within one minute.
[SERVER]: Enables the DHCP server function of the camera.
f
Factory setting: [OFF]
[IP ADDRESS]
Sets the IP address.
f
Factory setting: [192.168.0.1]
@
@
NOTE
t
Cannot be set when [LAN PROPERTY]
→
[IPv4 SETTING]
→
[DHCP]
→
[CLIENT] is selected.
[SUBNET MASK]
Sets the subnet mask.
f
Factory setting: [255.255.255.0]
@
@
NOTE
t
Cannot be set when [LAN PROPERTY]
→
[IPv4 SETTING]
→
[DHCP]
→
[CLIENT] is selected.
[DEFAULT GATEWAY]
Sets the default gateway.
f
Factory setting: [192.168.0.254]
@
@
NOTE
t
Cannot be set when [LAN PROPERTY]
→
[IPv4 SETTING]
→
[DHCP]
→
[CLIENT] is selected.