HP INTEGRITY RX3600 - Manual (Page 137)

2. To load the Red Hat Enterprise Linux operating system at the EFI Boot Manager menu,
select its entry from the list of boot options.
3. Selecting a Linux entry from the boot options list boots the operating system using
ELILO.EFI
loader and the elilo.conf file.
Booting Red Hat Enterprise Linux from the EFI Shell
1. Access the EFI Shell.
From the system console, select EFI Shell from the EFI Boot Manager menu to access the
shell.
2. Access the EFI System Partition for the Red Hat Enterprise Linux boot device.
Use the map EFI Shell command to list the file systems (fs0, fs1, and so on) that are known
and mapped.
To select a file system to use, enter its mapped name followed by a colon (:). For example,
to operate with the boot device that is mapped as fs3, enter fs3: at the EFI Shell prompt.
3. Enter ELILO at the EFI Shell command prompt to launch the ELILO.EFI loader.
If needed, you can specify the loader’s full path by entering \EFI\redhat\elilo at the
EFI Shell command prompt.
4. Allow the ELILO.EFI loader to proceed with booting the Red Hat Enterprise Linux kernel.
By default, the ELILO.EFI loader boots the kernel image and options specified by the
default item in the elilo.conf file.
To interact with the ELILO.EFI loader, interrupt the boot process, for example, type a space
at the ELILO boot
prompt.To exit the loader, use the exit command.
Booting the SuSE Linux Enterprise Server Operating System
You can boot the SuSE Linux Enterprise Server 9 operating system on HP Integrity servers using
either of these methods:
• “Selecting a SuSE Linux Enterprise Server entry from the EFI Boot Manager menu” (page 137)
• “Booting SuSE Linux Enterprise Server from the EFI Shell” (page 137) .
Selecting a SuSE Linux Enterprise Server entry from the EFI Boot Manager menu
1. Access the EFI Boot Manager menu.
2. Select its entry from the list of boot options.
3. Choose a Linux entry from the boot options list to boot the operating system using
ELILO.EFI
loader and the elilo.conf file.
Booting SuSE Linux Enterprise Server from the EFI Shell
1. From the system console, select EFI Shell from the EFI Boot Manager menu to access the
EFI Shell.
2. Access the EFI System Partition for the SuSE Linux Enterprise Server boot device.
Use the map EFI Shell command to list the file systems (fs0, fs1, and so on) that are known
and mapped.
To select a file system to use, enter its mapped name followed by a colon (:). For example,
to operate with the boot device that is mapped as fs3, enter fs3: at the EFI Shell prompt.
3. Enter ELILO at the EFI Shell command prompt to launch the ELILO.EFI loader.
If needed, you can specify the loader’s full path by entering \efi\SuSE\elilo at the EFI
Shell command prompt.
Booting and Shutting Down Linux 137