HP INTEGRITY RX3600 - Manual (Page 155)

NOTE: Your terminal console must be able to connect to the iLO 2 MP.
1. Login to the console with proper username and password.
NOTE: The default operator login and password are as follows:
login =
password = oper.
2. Enter cl to display the console history log. The log displays console history from the oldest
event to the newest event.
3. Enter sl to display the status logs. The status logs consist of the following:
•
SEL
• FP
• Current boot log
• Previous boot log
• Live events log
• Clear SEL/FPL logs
For a complete explanation of configuring the iLO 2 MP and using the iLO 2 MP commands, see
the HP Integrity Integrated Lights-Out 2 Management Processor Operations Guide.
Supported Configurations
This section provides a system build-up procedure.
System Block Diagram
Figure 5-3 and Figure 5-4 display the major rx3600 server functional components and their
interconnections. Core I/O is shown with a one SAS I/O card configuration. The Dual Gbit LAN
may be installed in slot 10 depending on the core I/O configuration.
Supported Configurations 155