Dimm memory carrier board slot ids, Figure 6-15: “8-dimm memory carrier board, Figure 6-15 – HP INTEGRITY RX3600 User Manual
Page 210
Figure 6-15 8-DIMM Memory Carrier Board Slot IDs
0A
1A
0B
1B
24-DIMM Memory Carrier Load Order
The 24-DIMM memory carrier has two sides labeled
side 0 and side 1, each of which contain a memory board. The 24-DIMM memory carrier can
contain up to six quads of memory. DIMM quads are loaded in order of size from largest to
smallest capacity.
DIMM quads are loaded in a certain way to balance the memory capacity between the two sides
of the memory carrier, starting with side 0. If you have more than two quads of memory to install,
load the first quad into slots 0A-0D of side 0, and load the second quad into slots 0A-0D of side
1. For the third and remaining quads of memory see
“Memory Loading Rules and Guidelines”
The DIMM slot IDS are the same for both 24-DIMM memory carrier boards. Unique slots are
identified within the carrier by the side in which they reside. For example, slot 0A is identified
as slot 0A, side 0; or slot 0A, side 1.
shows the DIMM slot IDs for the 24-DIMM memory carrier board.
210
Removing and Replacing Server Components