HP INTEGRITY RX3600 - Manual (Page 251)

11. Remove the interconnect board air baffle ( Figure 6-35 ).
a. Insert your finger into the opening on the interconnect board air baffle and pull upward
to release the air baffle from the chassis.
b. Lift the air baffle out of the chassis at an angle.
12. Remove the SAS backplane. See “Removing the SAS Backplane Board” (page 247) .
13. Insert your fingers into the handle on the interconnect board and push the board toward
the front of the chassis to unplug it from the socket on the midplane board ( Figure 6-36 ).
14. Lift the interconnect board out of the chassis ( Figure 6-36 ).
Figure 6-35 Interconnect Board Air Baffle
Front of Chassis
SAS Cable Guide
Finger Hole
Removing and Replacing the Interconnect Board 251