HP INTEGRITY RX3600 - Manual (Page 296)

Figure C-6 Advanced Adaptor Properties Screen
You can perform the following actions from Advanced Device Properties:
•
To set default values for all items on this screen, press Enter on Restore Defaults.
• To toggle between LUN 0 and All in any LUN field, press + or -. LUN 0 scans only LUN 0,
All scans all LUNs.
Max Devices Specifies the maximum number of devices attached to the
adapter for which to install a pre-OS IO interface.
Max Spin-ups Specifies the maximum number of targets that can be
simultaneously spinning up. The IOC must delay by the
time indicated in spin-up delay field before starting spin-up
of the next set of targets. A value of zero in the Maximum
Target Spinups
field is treated the same as a value of one.
IO Timeouts Specifies the time which the host uses to timeout I/Os for
the following devices with Non-Removable Media:
•
SCSI Device Type 00h - Direct Access
• SCSI Device Type 04h - Write Once
• SCSI Device Type 07h - Optical
• SCSI Device Type 0Eh - Simplified Direct Access
IO Timeouts (Removable) Specifies the time which the host uses to timeout I/Os for
the following devices with Removable Media:
•
SCSI Device Type 00h - Direct Access
• SCSI Device Type 04h - Write Once
• SCSI Device Type 05h - CD-ROM
• SCSI Device Type 07h - Optical
• SCSI Device Type 0Eh - Simplified Direct Access
296 Core I/O Card Utilities