HP INTEGRITY RX3600 - Manual (Page 91)

Accessing the Host Console
This section provides information on the different methods of accessing the host console of an
HP Integrity server.
This section addresses the following topics:
•
“Accessing the iLO 2 MP With the Web Browser” (page 91)
• “Accessing the Host Console With the TUI - CO Command” (page 92)
• “Accessing the Host Console With vKVM - Integrated Remote Console” (page 93)
• “Accessing the Host Console with the SMASH SM CLP” (page 93)
• “Accessing the Graphic Console Using VGA ” (page 93)
Accessing the iLO 2 MP With the Web Browser
Web browser access is an embedded feature of the iLO 2 MP.
The iLO 2 MP has a separate LAN port from the system LAN port. It requires a separate LAN
drop, IP address, and networking information from that of the port used by the operating system.
IMPORTANT: Make sure you use the MAC address to the iLO 2 MP LAN and not the MAC
address to the server core LAN.
Before starting this procedure, you must have the following information:
• IP address for the iLO 2 MP LAN
• Host name (this is used when messages are logged or printed)
To interact with the iLO 2 MP through the Web GUI, follow these steps:
1. Open a Web browser and enter the host name or the IP address for the iLO 2 MP.
2. Log in using your user account name and password at the login page. ( Figure 3-19 ).
Figure 3-19 Web Login Page
Accessing the Host Console 91