HP INTEGRITY RX3600 - Manual (Page 82)

1
IMPORTANT: Windows 2003 Server places the video controller into a non-standard resolution with a refresh rate
of 55Hz. Some LCD monitors are not capable of rendering a screen with refresh rates lower than 60Hz. Use one of
the following methods to resolve this issue:
• Use a monitor capable of 55Hz refresh rates. Virtually all analog monitors and the majority of LCD monitors are
capable of this.
• Use a LAN-based client to remotely access the server's iLO2 Integrated Remote Console (vKVM) feature for the
installation.
Setup Checklist
Use the checklist in Table 3-10 to assist you with the console setup process.
Table 3-10 Setup Checklist
X Action Step
Standard and Advanced
1. Determine access method to select and connect cables.
2. Determine LAN configuration method and assign IP address
if necessary.
Preparation 1
There are three methods to configure the LAN for iLO 2 MP access:
• DHCP with DNS
• ARP Ping
• RS-232 serial port Configure the iLO 2 MP LAN 2
Log in to the iLO 2 MP from a supported Web browser or
command line using the default user name and password. Log on to the iLO 2 MP 3
Change the default user name and password on the administrator
account to your predefined selections. Change default user name and
password 4
Set up the user accounts if using the local accounts feature. Set up user accounts 5
Set up the security access settings. Set up security access 6
Access the host console using method of choice. Access the host console 7
Advanced
Activate advanced features by entering a license key. Activate Advanced Pack Features
1
1 For details on Advanced Pack Features see the HP Integrity iLO 2 MP Operations Guide.
Console Setup Flowchart
Use this flowchart as a guide to assist in the console setup process.
82 Installing the System