HP INTEGRITY RX3600 - Manual (Page 43)

held for at least four seconds. The following values are reset to factory defaults when the button
is held for at least four seconds:
• Serial terminal baud rate settings
• User names and passwords
Core I/O Board Ports
Table 1-6 lists a description of the core I/O board ports shown in Figure 1-14 .
Table 1-6 Core I/O Board Ports
Description Port
LAN port dedicated for remote access to the iLO 2 MP 10 Base-T/100 Base-T LAN
Local serial port Auxiliary Serial
Local serial port that provides a console connection to the server Console Serial (iLO 2 MP)
Two public USB 2.0 ports used primarily to connect to a keyboard and mouse
for console input functions (Windows and Linux operating systems only) USB
VGA port used primarily to connect to a monitor that displays console output
(Windows and Linux operating systems only) VGA (optional)
iLO 2 MP Status LEDs
Table 1-7 shows the states and status of the iLO 2 MP status and LAN LEDs.
Table 1-7 iLO 2 MP Status and LAN LEDs
Status States iLO 2 MP LED
Standby power is on Solid green Standby power
iLO 2 MP self test running
1
Amber
iLO 2 MP Self test
Self test completed Off
Operational and functional Flashing green iLO 2 MP Heartbeat
Operational and functional Flashing green BMC Heartbeat
Activity Blinking green
Link Status Link with no activity Solid green
No link Off
100 Mb link Solid amber
Link Speed
10 Mb link Off
1 The LED is solid amber when ac power is first applied. It remains solid amber for a few seconds until the iLO 2 MP
completes its self test; the LED then turns off.
System LAN
The system LAN functionality is provided by the LAN core I/O card. The ports on the LAN core
I/O card are two RJ-45 style 10 Base-T/100 Base-T/1000 Base-T system LAN ports:
Table 1-8 show the system LAN link status and speed LEDs states and status.
Controls, Ports, and LEDs 43