HP INTEGRITY RX3600 - Manual (Page 150)

Table 5-10 VFP System Health Description
State LED Color
None. Off
The OS is booting or running. Green
Warning or critical fault. Check the logs for details. Flashing amber
Fatal fault. The system crashed or cannot boot. Check the
logs for details. Flashing red
Unit Identifier Button/LED
The UID Button/LED enables you to identify a specific system in a rack or data center environment.
one UID Button/LED is located in the front panel and a second is located at the rear of the chassis.
LEDs are incorporated into the pushbuttons to save space. Both buttons are toggle switches.
Push it once to turn on the LED and push it again to turn off the LED. Press either the front panel
UID Button/LED , or enter the iLO 2 MP and LOC commands to light both the rear panel LEDs.
Diagnostics Panel LEDs
The Diagnostics Panel improves serviceability by enabling you to look in a single location for
the LEDs that provide failing FRU locating and mapping information. These amber LEDs are
only lit when a failure occurs; otherwise, they are not lit. A label on the panel is oriented similarly
to the orientation of the components within the server. A diagnostic LED exists for each FRU in
the system, including all DIMMs.
Figure 5-2 displays the diagnostic panel LEDs.
Figure 5-2 rx3600 Diagnostic Panel LEDs
Table 5-11 lists diagnostic panel LED states.
150 Troubleshooting