HP INTEGRITY RX3600 - Manual (Page 203)

Figure 6-11 DVD Drive Removal and Replacement
DVD Release
Hole
Front Chassis View
Replacing the DVD Drive
To replace a DVD drive, follow these steps:
1. Insert the DVD drive, and push it straight into the drive bay until it clicks into place
(
Figure 6-11 ).
2. Reconnect the power cables and power on the server. See “Powering On the Server”
(page 94) .
Removing and Replacing the Memory Carrier Assembly
The memory carrier assembly encloses the system DIMMs. There are two different memory
carrier assemblies available for this server:
• 8-DIMM memory carrier assembly
• 24-DIMM memory carrier assembly
The 8- and 24-DIMM memory carrier assemblies have two sides, 0 and 1, each of which contain
a memory board. System DIMMs seat onto the memory boards.
Table 6-4 lists the supported memory carrier assembly configurations.
Table 6-4 Supported Memory Carrier Assembly Configurations
Memory Boards Installed Memory Carrier Configuration
Two 4-DIMM memory boards 8-DIMM memory carrier
Two 12-DIMM memory boards 24-DIMM memory carrier
Removing and Replacing the Memory Carrier Assembly 203