Intel SR9000MK4U - Manual (Page 105)

Intel ® Server System SR9000MK4U Product Guide 83
9. Determine your next course of action and refer to the appropriate steps:
— If you are following these steps as part of another procedure, return to that
procedure.
— If you are ready to re-assemble your server system, install the following items,
in order:
✧ All installed power supplies. For instructions, see
“Installing a Power Supply”
on page 68 .
✧ The power supply filler panel, if necessary. For instructions, see
“Removing a
Power Supply” on page 70 . Follow step 4 only.
✧ The top cover. For instructions, see
“Installing the Top Cover” on page 37 .
Installing and Removing the Power Supply
Support
Before beginning these steps, power down your server system and unplug all AC power
cords.
You will need to remove the top cover to perform the following operation:
• To install or remove the mounting plate
Removing the Power Supply Support
To perform this procedure, you will first need to remove:
• The top cover. For instructions, see “Removing the Top Cover” on page 36 .
• All installed power supplies. For instructions, see “Removing a Power Supply” on
page 70 .
• The power supply filler panel, if one is installed. For instructions, see “Installing a
Power Supply” on page 68 . Follow step 2 only.
• The power supply box. For instructions, see “Removing the Power Supply Box” on
page 76 .
Remove these components, in order, before beginning the steps below.
The steps below do not guide you through reinstalling the components you are removing
or disconnecting in this step sequence. These steps assume you are removing the power
supply support to either replace it, or to access another component. After completing these
steps, continue with the steps that directed you to this section, or follow the steps under
“Installing the Power Supply Support” on page 85 to replace your power supply support.