Intel SR9000MK4U - Manual (Page 63)

Intel ® Server System SR9000MK4U Product Guide 41
4. Remove the four screws at the sides of the hard drive carrier. Two screws are at
each side of the carrier. See letter “A” in the figure below.
Note: Do not remove the metal EMI shield from the carrier.
5. Lift the drive from the carrier.
Figure 29. Unmounting a Hard Drive
6. Determine your next course of action and refer to the appropriate steps:
— If you are installing a replacement hard drive, see “Installing a Hard Drive” on
page 38 , beginning with step 5.
— If you are following these steps as part of another procedure, return to that
procedure.
— If you have completed working with the drive carrier, slide it back into the
chassis opening.
AF001111
A