Installing and removing the fan box, Removing the fan box – Intel SR9000MK4U User Manual
Page 120
98
Intel
®
Server System SR9000MK4U Product Guide
✧ The KVM card, if necessary. For instructions, see
✧ All installed PCI cards. For instructions, see
.
✧ The hard drive backplane cover. For instructions, see
Drive Backplane Cover” on page 88
.
✧ The power supply box. For instructions, see
.
✧ All installed power supplies. For instructions, see
✧ The power supply filler panel, if necessary. For instructions, see
. Follow step 4 only.
✧ The top cover. For instructions, see
“Installing the Top Cover” on page 37
Installing and Removing the Fan Box
Before beginning these steps, power down your server system and unplug all AC power
cords.
You will need to remove the fan box to perform the following operations:
•
To install or remove the hard drive backplane
•
To install or remove the mounting plate
Removing the Fan Box
To perform this procedure, you will first need to remove:
•
The top cover. For instructions, see
“Removing the Top Cover” on page 36
.
•
All installed power supplies. For instructions, see
•
The power supply filler panel, if one is installed. For instructions, see
. Follow step 2 only.
•
The power supply box. For instructions, see
“Removing the Power Supply Box” on
•
The hard drive backplane cover. For instructions, see
.
•
The KVM card, if it is installed. For instructions, see
•
All installed PCI cards. For instructions, see
“Removing a PCI Card” on page 63
.
•
The PCI card divider. For instructions, see