Intel SR9000MK4U - Manual (Page 169)

Intel ® Server System SR9000MK4U Product Guide 147
When the power button is pressed and released while the main power is on, the power
turns off or the operating system begins a shut down process. If the power button is held
down, a forced power off is executed. If the power is forced off, then the server is not
powered on after AC power recovery even if on is selected as the Power On option. Use
the power button to power on the system, and then press and release the power button to
shut down the server without forcing it into the power off state.
Discard changes and
Exit
Does not store the changed values in CMOS, and exits setup. Clicking
on the menu item causes the system to prompt the user for a Yes or No
response.
Yes: Saves the changes and exits the utility.
No: Aborts the action.
Restore Defaults Restores the setting values to default. Clicking on the menu item
causes the system to prompt the user for a Yes or No response.
Yes: Loads the system setup defaults.
No: Aborts the action.
Exit Exits setup. If there are any changes, the user is prompted for a Yes or
No response.
Yes: Saves the changes and reboots the system.
No: Aborts the action.
Table 24. Main Setup Screen
Primary Menu Item Sub Menu Item Option Description
Power On Option After Power Failure [Return]
On
Off
Determines whether the system
should boot once power returns
after a power loss.
Return: Return to previous state
at power loss occurs. If power
loss occurs at system on state,
the system returns to the
power-on state at power
recovery. If it occurs at system
off state, the system will be
remaining off state.
On: Power on after power
recovery.
Off: Not goes to power on state
(Power off) after power
recovery.
Table 23. Primary Setup Screens
Screen Description