Installing the air flow guide, Figure 96. installing the air flow guide – Intel SR9000MK4U User Manual
Page 119
Intel
®
Server System SR9000MK4U Product Guide
97
Installing the Air Flow Guide
These steps assume you have removed the air flow guide, as described in
and your system is partially disassembled.
1. Place the air flow guide in the chassis.
2. Verify all three hooks in the chassis align with the corresponding three slots in the
air flow guide as shown in the figure below.
Figure 96. Installing the Air Flow Guide
3. Route loose cables through the cable guides at the rear of the air flow guide.
4. Determine your next course of action and refer to the appropriate steps:
—
If you are following these steps as part of another procedure, return to that
procedure.
—
If you are ready to re-assemble your server system, install the following items,
in order:
✧ The PCI card divider. For instructions, see
“Installing the PCI Card Divider”
.
AF001231