Intel SR9000MK4U - Manual (Page 158)

136 Intel ® Server System SR9000MK4U Product Guide
help [-b]|[cmd] Displays command help information.
hexedit [[-f]FileName|[-d DiskName Offset
Size]|[-m Offset Size]]
Edits files in hex mode.
if [not] condition then Executes commands under specific condition.
load [-nc] file [file...] Loads the EFI driver.
loadbmp [-c] [-t] [-i[UGA Instance]] file Displays a bitmap on the screen.
ls [-b] [-r] [-a[attrib]] [file] Displays files and subdirectories in the directory.
map [-r|-v|-d] [sname] [handle] [-b] Displays and configures mapping.
memmap [-b] Displays a memory map.
mkdir dir [dir...] Creates new directory.
mm Address [Width 1|2|4|8] [;MMIO | ;MEM |;IO
|;PCI] [:Value] [-n]
Displays or modifies memory, memory mapped I/O, and PCI.
mode [row col] Changes current graphic mode.
mount BlkDevice [sname] Mounts a file system on a block device.
mv src [src...] [dst] Moves file or directory.
openinfo Handle Displays handle or agent protocol.
pause Suspends input from a keyboard.
pci [Bus Dev [Func] [-i] [-s [Seg]]] Displays information of PCI device and PCI function on config
space.
reconnect DeviceHandle# [DriverHandle#
[ChildHandle#]] | [-r]
Reconnects the driver to a device.
reset [-w [string]] Resets the system.
rm [-q] file [file...] | dir [dir...] Deletes file or directory.
set [-d|-v|-b] [sname [value]] Displays, creates, modifies, or deletes the EFI environment
variables.
stall microseconds Delays the processor by the specified micro seconds.
time [hh:mm[:ss]] Displays or sets the time of the system.
type [-a|-u] [-b] file [file...] Displays the contents of a file.
ver Displays version information.
vol [fs] [Volume Label] Displays volume information of a file.
Table 20. EFI Shell Commands
Command Description