Intel SR9000MK4U - Manual (Page 172)

150 Intel ® Server System SR9000MK4U Product Guide
Server Management Screen
Table 28 describes the menu items available on the Server Management screen. Default
values appear in brackets.
Table 28. Server Management Screen
Primary Menu Item Sub Menu Item Options Description
Console Redirection COM1 Console
Redirection
Press <Enter> Pressing <Enter> invokes the
submenu to configure COM1 console
redirection.
Management LAN DHCP [Enable]
Disable
Enable: Acquires IP address of LAN
port by DHCP. Disable: Requires the
manual settings.
IP Address [255.255.255.255] IP address of management LAN port.
Available when DHCP is disabled.
Subnet Mask [255.255.255.255] Subnet mask of management LAN
port. Available when DHCP is disabled.
Default Gateway [255.255.255.255] Default gateway address of
management LAN port. Available when
DHCP is disabled.
SEL Clear N/A Press <Enter>. Pressing <Enter> prompts the user to
respond Yes or No.
Yes: Clears the SEL.
No: Aborts the action.
Table 29. COM1 Console Redirection
Menu Item Options Description
Headless Support [Enable]
Disable
Enable: Outputs firmware or EFI console input/output to COM1.
Provides SPCR or HCDP to OS. Disable: Does not output firmware
or EFI console input/output to COM1. Does not provide SPCR or
HCDP to OS.
When the valid VGA is not mounted, “Enable” is set.
COM1 Speed 9600 bps
[19200bps]
Uses the communication speed specified when console redirection
is valid.