Intel SR9000MK4U - Manual (Page 145)

Intel ® Server System SR9000MK4U Product Guide 123
6. Lift the bolster plate from the LGA terminal on the underside of the heat sink /
processor assembly. See the figure below.
Caution: The processor can be damaged if handled improperly. Do not touch the
processor pins.
Figure 124. Removing the Bolster Plate from the Processor
7. Use a Torx-15 screwdriver to loosen four spring clip screws. See letter “A” in the
following figure.
Figure 125. Removing the Processor from the Heatsink
AF001253
AF001259
A