Removing a pci card, Figure 57. opening a pci caution plate – Intel SR9000MK4U User Manual
Page 85
Advertising
Intel
®
Server System SR9000MK4U Product Guide
63
Removing a PCI Card
To perform this procedure, you will first need to remove the top cover. The steps below
will direct you to the instructions to remove the top cover at the appropriate location in the
step sequence.
Cautions:
•
Before performing the procedures in this section, except for when hot-swapping turn
off the system and then disconnect all power plugs.
•
Use caution when installing the add-in card to avoid touching components on the
card.
1. Remove the top cover. For instructions, see
“Removing the Top Cover” on page 36
.
2. Raise the PCI caution plate. See letter “A” in the figure below.
Figure 57. Opening a PCI Caution Plate
AF001138
A
Advertising