Intel SR9000MK4U User Manual
Page 97
Intel
®
Server System SR9000MK4U Product Guide
75
4. Determine your next course of action and refer to the appropriate steps:
—
If you have removed your front control panel / optical drive assembly and need
to replace it, see
“Installing the Front Control Panel and Optical Drive
—
If you are following these steps as part of another procedure, return to that
procedure.
Installing the Front Control Panel and Optical Drive
Assembly
These steps assume you have removed your front control panel and optical drive
assembly, your server system is currently powered down, and your front bezel is removed.
1. Slide the front control panel / optical drive assembly in through the front of the
chassis as shown in the left figure below.
2. Push the assembly firmly until it clicks into place.
Figure 72. Installing the Front Control Panel and Optical Drive Assembly
3. Determine your next course of action and refer to the appropriate steps:
—
If you are following these steps as part of another procedure, return to that
procedure.
—
Install the front bezel. For instructions, see
“Installing the Front Bezel” on
.
AF001212