Intel SR9000MK4U - Manual (Page 148)

126 Intel ® Server System SR9000MK4U Product Guide
The steps do not guide you through reinstalling the components you are removing or
disconnecting in this step sequence. These steps assume you are removing the mounting
plate to replace it. After completing these steps, continue with
“Installing the Mounting
Plate” on page 127 to replace your mounting plate.
1. Grasp the front handle of mounting plate assembly and lift the mounting plate
slightly. See letter “A” in the figure below.
2. While continuing to hold the front of the mounting plate, grasp the handle at the
rear of the mounting plate. See letter “B” in the figure.
3. Lift the mounting plate from the system.
Figure 128. Lifting the Mounting Plate from the System
4. Install a replacement mounting plate. For instructions, see “Installing the Mounting
Plate” on page 127 .
AF001242
A
B