Intel SR9000MK4U - Manual (Page 99)

Intel ® Server System SR9000MK4U Product Guide 77
1. Disconnect the CPU1 / CPU2 MVR cable from the main board. To disconnect this
cable, press and hold the latch on the cable connector while pulling on the
connector. See the figure below to locate the MVR cable connection.
Figure 73. Locating the CPU1 / CPU2 MVR Connection
2. Disconnect the IDE cable from the main board. See letter “A” in the figure below.
3. Disconnect the SAS4I cable from the main board. To disconnect the cable, press
both ends of the cable to be unlocked, and then disconnect it. See letter “B” in the
figure.
4. Remove the cables from the clips at the top of the power supply box. See letters
“C” and “D” in the figure.
Figure 74. Disconnecting the IDE and SATA Cables
AF001431
AF001432
A
B
C D