Installing and removing the pci card divider, Removing the pci card divider – Intel SR9000MK4U User Manual
Page 113
Intel
®
Server System SR9000MK4U Product Guide
91
2. Determine your next course of action and refer to the appropriate steps:
—
If you are following these steps as part of another procedure, return to that
procedure.
—
If you are ready to re-assemble your server system, install the following items,
in order:
✧ The power supply box. For instructions, see
✧ All installed power supplies. For instructions, see
.
✧ The power supply filler panel, if necessary. For instructions, see
✧ The top cover. For instructions, see
“Installing the Top Cover” on page 37
Installing and Removing the PCI Card Divider
Before beginning these steps, power down your server system and unplug all AC power
cords.
You will need to remove the PCI card divider to perform the following operations:
•
To install or remove the fan box
•
To install or remove the air flow guide
•
To install or remove the hard drive backplane
•
To install or remove the mounting plate
•
To install or remove a processor
Removing the PCI Card Divider
To perform this procedure, you will first need to remove:
•
The top cover. For instructions, see
“Removing the Top Cover” on page 36
•
All installed power supplies. For instructions, see
.
•
The power supply filler panel, if one is installed. For instructions, see
•
The power supply box. For instructions, see
“Removing the Power Supply Box” on
.
•
The KVM card, if it is installed. For instructions, see
.
•
All installed PCI cards. For instructions, see