Intel SR9000MK4U - Manual (Page 116)

94 Intel ® Server System SR9000MK4U Product Guide
3. Install the CPU1 / CPU2 MVR cable. See the figure below to locate the connection
point on the server board.
Figure 94. Locating the CPU1 / CPU2 MVR Connection
4. Determine your next course of action and refer to the appropriate steps:
— If you are following these steps as part of another procedure, return to that
procedure.
— If you are ready to re-assemble your server system, install the following items,
in order:
✧ The KVM card, if necessary. For instructions, see
“Installing the KVM Card”
on page 90 .
✧ All installed PCI cards. For instructions, see
“Installing a PCI Card” on
page 59 .
✧ The hard drive backplane cover. For instructions, see
“Installing the Hard
Drive Backplane Cover” on page 88 .
✧ The power supply box. For instructions, see
“Installing the Power Supply
Box” on page 80 .
✧ All installed power supplies. For instructions, see
“Installing a Power Supply”
on page 68 .
✧ The power supply filler panel, if necessary. For instructions, see
“Removing a
Power Supply” on page 70 . Follow step 4 only.
✧ The top cover. For instructions, see
“Installing the Top Cover” on page 37 .
AF001431