Installing and removing the hard drive backplane, Removing the hard drive backplane – Intel SR9000MK4U User Manual
Page 125
Intel
®
Server System SR9000MK4U Product Guide
103
4. Determine your next course of action and refer to the appropriate steps:
—
If you are following these steps as part of another procedure, return to that
procedure.
—
If you are ready to re-assemble your server system, install the following items,
in order:
✧ All installed fans. For instructions, see
✧ The air flow guide. For instructions, see
“Installing the Air Flow Guide” on
✧ The PCI card divider. For instructions, see
“Installing the PCI Card Divider”
.
✧ The KVM card, if necessary. For instructions, see
.
✧ All installed PCI cards. For instructions, see
✧ The hard drive backplane cover. For instructions, see
Drive Backplane Cover” on page 88
✧ The power supply box. For instructions, see
✧ All installed power supplies. For instructions, see
.
✧ The power supply filler panel, if necessary. For instructions, see
✧ The top cover. For instructions, see
“Installing the Top Cover” on page 37
Installing and Removing the Hard Drive
Backplane
Before beginning these steps, power down your server system and unplug all AC power
cords.
Removing the Hard Drive Backplane
To perform this procedure, you first need to remove:
•
The front bezel. For instructions, see
“Removing the Front Bezel” on page 34
.
•
The top cover. For instructions, see
“Removing the Top Cover” on page 36
•
All installed hard drive carriers. For instructions, see
. Follow steps 1 through 3 only.
•
The front control panel and optical drive assembly. For instructions, see
the Front Control Panel and Optical Drive Assembly” on page 74
.