Intel SR9000MK4U - Manual (Page 121)

Intel ® Server System SR9000MK4U Product Guide 99
• The air flow guide. For instructions, see “Removing the Air Flow Guide” on
page 95 .
• All installed fans. For instructions, see “Removing a Fan” on page 57 .
Remove these components, in order, before beginning the steps below.
The steps below do not guide you through reinstalling the components you are removing
or disconnecting in this step sequence. These steps assume you are removing the fan box
to either replace it, or to access another component. After completing these steps, continue
with the steps that directed you to this section, or follow the steps under
“Installing the
Fan Box” on page 101 to replace your fan box.
1. Loosen one screw on each side of the system, as shown by letter “A” in the figure
below.
Figure 97. Loosening the Exterior Screws
AF001221