Intel SR9000MK4U - Manual (Page 162)

140 Intel ® Server System SR9000MK4U Product Guide
8. After the format has completed, press the <Esc> key several times, until you see the
following screen.
9. Select Exit the Configuration Utility and Restart and press the <Enter> key to
exit from the utility.
Clearing the CMOS
To clear the CMOS, use the following steps:
1. Turn off the system.
2. Leave the power cord(s) connected.
3. Hold down the reset button until the system LED begins to flash.
4. Power on the system.
Upgrading the Firmware
The FWUPDATE utility updates the SAL/BMC and writes sensor data records to the
Intel
®
Server System SR9000MK4U. A FWUPDATE is performed as an EFI shell
command.
LSI Logic MPT Setup Utility 2.00.06.00
Are you sure you want to exit?
Cancel Exit
Save changes and restart.
Discard changes and restart.
Exit the Configuration Utility and Restart
Esc = Exit Menu F1/Shift+1 = Help